Applications

• Fast, efficient installation of mullions, steel, panels, insulation, guttering, facings, drylining, metsec etc.
• Fast, efficient installation of wet render insulation cladding.
• Platform face can be tailored to accommodate most recesses & protrusions.
• Mastclimbers™ can install 24m wide x 60m high in 2 days and dismantle and clear site in 1.5 days. The MCWP is an environmentally friendly system that leaves occupants secure with minimum disruption from vandalism etc.

• Using MASTCLIMBERS™ can reduce contract duration by half.
• Raising men, tools and new windows to work height and removing old windows and debris from the outside means no disruption to internal corridors, elevators or flats.
• Replace 1000 windows on 20 storeys in 4 weeks (6 x carpenters & 6 x labourers).
• Resident friendly system - no shrouding of windows & limited security risk while work continues.
• 110v/240v hand tool power points on platforms.

• Using MASTCLIMBERS™ can reduce contract duration by one third.
• Raise men and material to ideal working height.
• Power tool sockets are standard & blasting lines (air or water) can be run to the platform up the mast.
• Assembly can be tailored to shroud uneven corners.
• No climbing up ladders with heavy tools & materials.
• An environmentally friendly system that leaves the occupants secure with minimum disruption.

• Installation of steelwork, insulation and/or cladding panels is simple when using Mastclimbers™.
• Power tools, lighting & canopies on platform create a ‘workshop in the sky’.
• Fast installation & dismantle minimises the site disruption for other trades.
• No stretching or bending - always at ideal when working at height.

• MASTCLIMBERS™ are increasingly becoming the most efficient method of access on bricklaying contracts.
• Where material feeding of bricks, blocks and mortar is well co-ordinated and mortar mix/setting times are carefully planned, production boosts of up to three times can be enjoyed.
• Three times the volume can be laid using quick setting mortar.
• Masonry workers back complaints are significantly reduced.

• Machines can fit into spaces of less than 1.2m².
• Single machines are ideal for installing the cables/runners/doors/electrics/guides etc for personnel lifts.
• Larger machines can be designed for installing bigger lifts.
• Machines can travel at up to 12m/min, thus enhancing the efficiency of the installation.

• Raising and installing heavy glass together with men and materials to ideal work height.
• Cranes/winches can be installed on platform mast to assist in lifting heavier materials.
• Inclined angle facades are no problem.
• Limited inconvenience from tie supports.
• SWL of up to 3500kg.
• 110v/240v hand tool power points on platforms.

• Painter always at correct level ensures even paint finish (spray or brush).
• 110v/240v hand tool points for cleaning or polishing.
• Weather protection canopy options create a "Workshop in the sky" to execute tasks safely, efficiently and to the benefit of operatives.
• Work continues with no disruption pedestrians, shops, pavement and parking to below.

• MASTCLIMBERS™ can provide a continuous edge protection around the building’s roof edge perimeter while work above continues.
• Easy conveyance for beams and girders and awkward shaped material.
• No ties around new roof structure required.
• Back hand rail can be extended to increase safety and prevent materials falling to the ground.
• Up to 10m oversail available.

• As well as access to vertical facades, MASTCLIMBERS™ are able to provide access to buildings with either acute or obtuse angled facades.
• Specially designed base and drive units can achieve exactly the right angle for installing glass panels whilst providing a horizontal platform to work from.
• Platforms can then be progressively dismantled, fitting the final panels as ties are removed.

• Harsco Infrastructure pioneered the ‘shelf-bracket’, a load bearing arrangement of MKII formwork components designed to take the weight of an MCWP.
• This system is best used where there is a requirement to suspend a machine above a non load-bearing structure.
• Successful in tackling problems posed by non load-bearing roofs.
• Anchors into the floor slab and provides a stable base from which the MASTCLIMBERS™ can be built.

• Completely enclosed platform provides a ‘Workshop in the Sky’ for operatives.
• Weather-protected work environment.
• Power outlets for lighting, hand tools, heaters etc.

• Complete façade installation at twice the speed. 
• Safely and efficiently install large vertical façade cladding panels.
• Provide men and material access to areas above and below any large protrusions from building façade.